Discover new possibilities with SKY-boosted water. Enable shrimps and hardwater plants to thrive together with softwater plants*. Replenish all vital minerals in RO/ RODI water with no negative altering of NPK, KH or pH.
Each 3.5g / 5ml per 60L adds 12ppm Calcium and 3.5ppm Magnesium (+2.5 dGH) Recommended: 15ml per 60L of RO/RODI water.
*To grow softwater plants, RO/RODI water recommended if tap water measures >2 dKH
Available in US and Europe soon.
APT SKY resolves the key conundrum of how to increase water hardness (specifically as a GH booster) without altering NPK values (which interfere with the calibrated ratios of fertilisers) and KH (where higher values are not favoured by most commercial aquatic plants).
Ca (Calcium): 21.5% Mg (Magnesium): 5.4% B (Boron): 7mg/L Cu (Copper): 1mg/L Fe (Iron): 0.06% Mn (Manganese): 17mg/L Mo (Molybdenum): 0.01mg/L Zn (Zinc): 9mg/L Seaweed extract <1%
the weather at your command
Enjoy the freedom to breed shrimps in softwater tanks, and have hardwater and softwater plants thrive side-by-side.
If you have softwater or use RO water, then simply add 15ml per 60L.
If you have hardwater or are unsure, obtain a GH reading using any common test kit. You can also read your local water report as we describe here.
Use the SKY Dosage Calculator (below) to determine dosage. For the very first dose, Water Volume = tank's water volume. GH Reading is your tank's GH level.
Subsequently, during water change, Water Volume = Volume of new tap water added. GH Reading = tap water GH level.
One way is to first mix APT SKY in a small container with some water and add the milky solution into the tank.
Or you can simply add APT SKY powder directly into the tank. It is OK if it covers the plants.
As a GH booster, APT SKY is ~ 3X as concentrated as conventional remineralisers. Each 3.5g / 5ml per 60L adds 12ppm Calcium and 3.5ppm Magnesiumm, raising GH by 2.5 dGH.
Did we mention that it is super-soluble, non-caking and just a joy to handle?
I'm new to planted tanks. Do I really need SKY?
If you are using reverse-osmosis (RO / RODI) water, it is important to replenish the minerals removed as part of the RO process. APT SKY is simply the best remineraliser. It is powerful (and therefore economical), uniquely comprehensive, and does not negatively alter macro nutrients, KH and pH.
If you are not using an RO/ RODI system because you are lucky enough to have stable softwater, and have a nature-style aquarium ( a mix of plants, hardscape and fish), APT SKY expands your playground to popular species like Rotala macrandra which require higher levels of magnesium than what is commonly found in softwater regions.
If you are not using an RO/ RODI system because you are lucky enough to have stable softwater, and plan to keep shrimps, APT SKY is a great booster for shrimp health and reproduction, due to the Calcium and other minerals it provides. Note: Shrimps are bred in varying water parameters. Always try match the shrimp's 'home' parameters (i.e the farm or place where they were bred).
How can I calculate how much to dose?
Each 3.5g / 5ml ( 1 scoop) adds 12ppm Calcium and 3.5ppm Magnesium and raises GH by 2.5 dGH in 60L of water.
We recommend a target of 5-7 dGH. Use the SKY Dosing Calculator above.
Is there a target or recommended TDS?
Unfortunately, no. This is because TDS readings can vary considerably. A high reading is not necessarily good, and a low reading is not always insufficient. For example, 100pm of Calcium in water (high TDS) is relatively harmless while 5ppm of copper (low TDS) will kill most aquatic life.
TDS, or "Total Dissolved Solids" simply measures all dissolved organic & inorganic substances in the water. However, it does not tell us WHAT is in the water. What makes up the TDS value is alot more important than the aggregate reading.
Then why do people measure TDS?
TDS is very useful as a relative test.
It is like a thermometer. It is useful to check if it rises or falls over time, as the cause may be consequential.
If your room temperature rises sharply, may be a sign of a breakdown in ventilation or clogged air conditioning. It may came from the window being left closed or open. It may result from the automatic blinds failing to work. It may be because of an overheated computer in the room.
As a relative test, TDS is useful when adding new hardscape or other materials to the tank. If TDS rises over time, it means that some part of the rock is dissolving. Totally inert rock will not change the TDS value.
How do I know if I'm growing 'conflicting' species?
We cover many popular plants on our website, so this is a good place to start. APT SKY removes the need for guesswork. If you have low KH to start with, APT SKY optimizes water parameters for both softwater and hardwater plants. If you have hardwater (above 2dKH), an RO/RODI system makes plant growing alot easier as the majority of tropical aquatic plants prefer softer water.
I'm new to planted tanks. Should I start with a fertiliser, or APT SKY?
They do different things. It is always important to fit plants to their preferred water parameters. It is much harder to grow Rotala macrandra in hardwater for example. They won't die, but will struggle to display good form or coloration. Better nutrition in the form of fertilisers cannot compensate for mismatched water parameters.
How do I add SKY to my tank?
A good way is to add it first to a small container, shake to dissolve it partially, and then to pour the solution into the tank.
You may also add it directly, in powder form, into the tank if you have good water flow.
In zones of poor flow, it may take more than a day for it to dissolve completely.
I don’t use RO water. How much should I dose?
If you have water that is considered 'soft' (you don’t experience much mineral residue in your kettle etc.),
you can follow the standard dose:
15ml per 60L.
Dosing above the 36ppm Ca / 10ppm Mg does not have negative effects.
If you want to be precise, get a copy of your local water report, which will tell the amount of Calcium and Magnesium in your tap water, usually in mg/L which is equivalent to ppm (parts per million). Or get a GH test kit and measure the GH of your tank's water.
USING YOUR WATER REPORT
Let’s say your tap water has 12ppm of Calcium and 3ppm of Magnesium (and you have a 60L tank).
Each 5ml adds 12ppm Ca and 3.5ppm Mg.
So to reach the target of 10ppm Mg, you need to add 10ml (2x3.5ppm = 7ppm).
When added to the existing 3ppm, that gives 10ppm.
Calcium will be raised by 12x2= 24ppm.
When added to your existing 18ppm of Calcium, you get 24ppm= 18ppm = 42ppm of Calcium.
This is higher than the targeted 36ppm, but that is OK.
USING YOUR GH TEST KIT
Let's say your tank water measures 2 dGH. You can use the APT SKY Dosing Guide above to find out how much you should dose based on the water volume. When dosing the first time, use your tank volume as the Water Volume. Subsequently, the Water Volume is the amount of water changed.
Really? Dose per water changed?
If we dose according to the water replaced during water change, wouldn't the overall average GH / Calcium / Magnesium levels drop over time?
Yes, technically the 'residual' water that was not changed would have a lower level of Calcium and Magnesium after being absorbed by plants.
You can indeed measure the GH of your total tank water after every water change, and then add APT SKY to hit the targeted ~7 dGH level.
However we find the difference to be negligible in terms of actual impact to plant health.
I have hardwater. How should I use APT Sky?
Hardwater simply means your water has high mineral content.
This can mean either:
(a) a high level of carbonates (positive KH reading) or
(b) a high level of Calcium / Magnesium (positive GH reading) or
(c) both of the above.
It is common for "hardwater" to have both high GH and KH because sources of hardwater usually come from areas with limestone [CaCO3] - which contributes to both GH [Ca ion] and KH [CO3 ion]. However, hardwater can be high in GH and low in KH and vice versa.
Basically, if you have GH below 7 dGH, you can use APT SKY to raise GH to the recommended ~7 dGH zone.
However APT SKY does not alter KH, so simply raising GH to the ~7dGH zone will not allow you to keep softwater plants.
Tap water quality can vary tremendously from area to area. One easy way to plan ahead for your tanks need without spending money on test kits is to read the local tap water report on what is in our water. This guide covers how to interpret the numbers in a local water report and which parameters to pay attention to.